Categories

Sale Price
Paslode Pair FrameMaster PowerVent And TrimMaster Gas Gun Kit # S20503JT

Paslode Pair FrameMaster PowerVent And TrimMaster Gas Gun Kit # S20503JT

$1,195.00 $1,295.00
(You save $100.00)

Write a Review
SKU:
S20503JT
Availability:
IN STOCK FOR IMMEDIATE DESPATCH
Shipping:
$25.00 (Fixed Shipping Cost)

Description

 paslode.jpg


Includes
1 x Paslode PowerVent FrameMaster Li-Ion B20543P
1 x Paslode TrimMaster Li-Ion 16Ga B20721
2 x Paslode Lithium-Ion Batteries B20543A
1 x Paslode Lithium-Ion Charger
2 x Paslode Hard Shell Carry Cases

Paslode PowerVent FrameMaster-Li B20543P

Features
PowerVent Technology (15% more power)
Driving 50-90mm nails in the timber including hardwood and LVL
Innovative Power+ Fuel Cell
Enables high performance in the most extreme climate conditions
New 22Ah Lithium-lon battery
Drives 9,000 nails per full charge
Lightweight Impulse gas technology and low actuation pressure
Reduces operator fatigue

Applications
Framing, Decking, Cladding, Eaves, Flooring, Joists, Trusses, roofing, formwork

Specifications
Fuel Cell Life : 1000 Nails (approx.)
Cycle Rate : 1000/hr (2-3/sec. intermittently)
Length : 310mm
Height : 386mm
Weight : 3.3kg
Fastener Length : 50-90mm
Magazine Capacity : 52 Nails (approx.)


Paslode TrimMaster Li-Ion 16Ga B20721

Features
Drives TrimMaster Angled Brads
Lithium Ion Battery Technology – 50% more shots per charge allowing you to complete the job faster
Battery On/Off Position – locks battery in place when disengaged for safer handling and minimising the need to replace batteries
Angled Magazine – easy to reach tight spaces
Application:
Cabinet making, Fix out, Glazing bead, Light trim, Panelling, Shopfitting, Window manufacture

Specifications
Fuel Cell Life : 1000 Brads
Cycle Rate : 500/hr (2-3sec. intermittently)
Length : 274mm
Height : 292mm
Weight : 2.0kg
Fastener Length : 32-63mm
Magazine Capacity : 100 brads

Includes
1 x Paslode PowerVent FrameMaster Li-Ion B20543P
1 x Paslode TrimMaster Li-Ion 16Ga B20721
2 x Paslode Lithium-Ion Batteries B20543A
1 x Paslode Lithium-Ion Charger
2 x Paslode Hard Shell Carry Cases

 

PRODUCT ENHANCEMENTS
• 3 key product enhancements to further improve the Impulse FrameMaster-Li’s performance:
• Increase Power - To eliminate standing nails in harder wood types (i.e. old growth timbers & laminated veneer lumbers) and the resulting need to follow up with a hammer to finish nails flush.
• Optimal performance in Extreme Weather - Consistent performance even in freezing temperatures. Tradies want reliable performance in below freezing temperatures without having to warm up their fuel cells.
• Longer Run Time Battery – A longer Run-Time while on site for ongoing productivity and efficiency.

15% MORE POWER
• Additional vents which create less resistance, allowing air to be released until the very last mm of piston stroke
• Power+ Fuel Cells which contain a revised gas mixture
• The additional vents result in more energy transferred to the nail.
• Combined with the more potent fuel mixture, the New FrameMaster-Li provides the required power to drive nails flush, even in hardwood applications including LVL.

EXTREME WEATHER PERFORMANCE
• The new Power+ fuel mixture includes gases with lower flashpoints, meaning it will ignite in lower temperatures
• The new mix now ensures consistent performance even in freezing temperatures, which means tradies operating in such conditions no longer need to warm up their fuel cells (e.g. through body heat) prior to operating their tool.

LONGER RUN TIME BATTERY
• Battery capacity has been lifted from 1.5Ah to 2.2Ah
• The upgrade now allows the Paslode Li-Ion battery to last for approximately 9,000 shots on a full charge, which provides Tradies with a 50% Longer Run-Time.

 

 

Warranty Information

Warranty Claims Just Tools will honour all warranties as offered by each manufacturer (as per above details) Please fill in your warranty card or register online if required on the purchase of any product. All warranty claims can be dealt with at your closest authorised repair agent or dealer. A copy of your proof of purchase (Tax Invoice) will be required for all warranty claims. If tools are returned to Just Tools for Warranty claims, the end user is responsible for the freight charge for return of the item, however, once the warranty repair is complete, the items will be dispatched at the cost of Just Tools.

Videos