Categories

FREE Delivery
Lufkin Auto Levelling Rotary Laser Level #LR600

Lufkin Auto Levelling Rotary Laser Level #LR600

$1,099.00
(No reviews yet) Write a Review
SKU:
LR600
Shipping:
Free Shipping
Free:
FREE Delivery

Description



lufkin-logo.jpg



FEATURES

Specifications
• Self-levelling range : ± 5°
• Adjustment speed : approx. 30 sec – on entire working angle
• Precision : Horiz ± 1 mm/10 m - Vert ± 1.5mm/10m
• Sensor : Electronic levelling device
• Horizontal levelling : Automatic
• Rotation speed : 120 RPM (low) & 500 RPM (high)
• Remote control : Infrared IR
• Laser wavelength : 635 nm
• Laser : Class II/III (EN60825-1:2003-10)
• Laser output rating : < 1 mW
• Rechargeable batt. operating time : approx. 20 h 
• Non-rechargeable battery life : approx. 30 h, 4 x Typ C
• Battery recharging time : approx. 14 h
• Ambient operating temperature range : -10°C ... +50°C
• Weight : 3 kg

Features
• The LR600 is a professional instrument with an extremely rugged design, enabling precision automatic levelling.
• Self-levelling range ± 5° horizontal, accuracy 1 mm-10 m, temperatureresistant 
sensor system (SLS).
• Highest reliability is guaranteed through the anti-drift system(ADS): The electronics permanently monitor the measuring process and switch the laser off in the case of any outside interference or disturbance.
• Adjustable horizontal tilt, easy one-button operation.
• Includes LRD120 laser detector and remote control unit.
• The device can also be operated with standard alkaline batteries (4 x type C). Insert the batteries as shown by the installation symbols. Ensure the polarity is correct.
• If the LED blinks constantly, either the batteries must be exchanged or recharged.

Calibration Adjustment
1. Switch the LR600 off.
2. Hold down the safety mode button and briefly press on/off button. Keep holding the safety mode button down until the LED’s on thecontrol panel flash 2 times. (Approximately 10 seconds).
3. Calibration adjustments are all made using the calibration panel on the remote control.

X Axis Adjustment
1. Turn the LR600 so that the X axis faces a wall or post (reference surface).
2. Activate calibration adjustment mode as described above.
3. Press the X-Y button on the remote control twice. The X LED on the calibrate panel will illuminate as shown on the right. The laser head will start rotating and the X axis can now be adjusted.
4. Adjust the position of the beam using up down buttons on the remote control until the desired position is achieved.
5. To save the new setting press ENT button on the remote control. The X axis LED will now turn off.

Y Axis Adjustment
1. Turn the LR600 so that the Y axis faces a wall or post (reference surface).
2. Activate calibration adjustment mode as described above.
3. Press the X-Y button on the remote control 3 times. The Y LED on the calibrate panel will illuminate as shown on the right. The laser head will start rotating and the Y axis can now be adjusted.
4. Adjust the position of the beam using up down buttons on the remote control until the desired position is achieved.
5. To save the new setting press ENT button on the remote control. The Y axis LED will now turn off.

Z Axis Adjustment 
1. Set up the LR600 so that the Z axis (vertical line) aligns with a vertical plumb line.
2. Activate calibration adjustment mode as described previously.
3. Press the X-Y button on the remote control 3 times. The Z LED on the calibrate panel will illuminate as shown on the right. The laser head will start rotating and 
the Z axis can now be adjusted.
4. Adjust the position of the beam using up down buttons on the remote control until the desired position is achieved.
5. To save the new setting press ENT button on the remote control. The Z axis LED will now turn off.

 

 

 

 12 MONTHS WARRANTY

 

Warranty Information

Warranty Claims Just Tools will honour all warranties as offered by each manufacturer (as per above details) Please fill in your warranty card or register online if required on the purchase of any product. All warranty claims can be dealt with at your closest authorised repair agent or dealer. A copy of your proof of purchase (Tax Invoice) will be required for all warranty claims. If tools are returned to Just Tools for Warranty claims, the end user is responsible for the freight charge for return of the item, however, once the warranty repair is complete, the items will be dispatched at the cost of Just Tools.