• Parallel Side fence for Circular Saw
• Parallel Edge Guide enables guided, parallel cutting with the TS 55 Plunge Cut Saw.
• Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails.
• Attaches to both sides of the saw for short side or broad side cuts.
• Rip capacity from the blade side up to 11 13/16in (300mm), and on the motor side up to 3 3/4in (95mm).
• Max. workpiece width : 100 mm
TS 55 Plunge Cut Saw, TS 55 R Plunge Cut Saw
* saw not included