Special H-CLASS
Festool 48Ltr H-Class Special Dust Extractor 201482 # CTH48E-FS

Festool 48Ltr H-Class Special Dust Extractor (201482) # CTH48E-FS

(No reviews yet) Write a Review
Click Add To Cart to Calculate
Special H-CLASS



• The 48 litre Festool special application dust extractor is your only answer for safe, efficient hazardous dust removal.
• Asbestos, mould, fibrous mineral dust, lead, cadmium, nickel, zinc chromate - the carcinogenic and pathogenic dust doesn't stand a chance.
• With the high power suction turbine and a 99.995% degree of filtration there is no danger to health.
• The two layer safety filter bag prevents contact with the dust when disposing of the bag.
• Approved for dust class H, the extractor can be fitted with add on modules for air or continuous power or used with the automatic electronic switch on/off function.
• H Class Dust Extractors are excluded from Festool’s 30 Day Money Back Guarantee.
• H Class Dust Extractors come with standard 12 month warranty.

• Removal of carcinogenic and pathogenic dusts
• Workshop and on site cleaning
• Automatic operation with power and air tools
• Wet and dry extraction

• Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.

• Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.
• When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet.
• Bluetooth system can then be used to switch the dust extractor on and off as required.
• When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)

• Maximum Airflow (litres per minute) : 3,900 l/min
• Maximum Vacuum (Pa) : 24,000 Pa
• Filter Surface Area (cm2) : 6,318 cm2
• Power consumption : 350 - 1,000 W
• Airflow max. : 3,900 l/min
• Max. vacuum : 24,000 Pa
• Filter surface area : 6,318 cm²
• Rubber-insulated mains cable : 7.5 m
• Container/Filter Bag Capacity (litres) : 48 L / 46 L
• Dimension (L x W x H) : 740 x 406 x 1005 mm
• Power Consumption (W or kW) : Maximum 1200 W
• Auto Clean Function : No
• Dust Approval Rating : Dust Class H - high risk dust such as carcinogenic or pathogen contaminated dust
• Mains Cable : Rubber Insulated
• Mains Cable Length (m) : 7.5 m
• Dimensions - L x W x H (mm) : 740 mm x 406 mm x 1,005 mm
• Weight (kg) : 18.8 kg

• CTH 48 Dust Extractor
• Safety Filter Bag
• Basic Cleaning Set 27 mm / 36 mm
• Integrated Hose Garage
• Cord Holder
• Antistatic Suction Hose D27/32x3.5 m
• SYS-Dock with T-LOC Function
• Tool Manual

• H Class Dust Extractors are excluded from Festool’s 30 Day Money Back Guarantee.
• H Class Dust Extractors come with standard 12 month warranty.



Safe dust removal

Festool's CTH provides maximum safety in the case of carcinogenic and pathogenic dusts such as lead, cadmium, nickel and zinc chromate.

Safety sealed

The two layer safety filter bag prevents contact with the harmful dust when disposing of the bag.

High suction power

Super strong and yet super small, the high power turbine provides considerable higher suction power but takes up very little room.

Maximum utilisation

The flat filter design allows the filter bag to unfold easily and expand to use almost 100% of its capacity. Hold more dust in a more compact extractor.

Customise for your needs

Every extractor can be fitted with add on modules to suit different requirements including air modules, power socket with continuous current and EAA module.

Easy handling

The large handle makes it easy to manoeuvre to CTH into place. The integrated locking brake and oversized wheels ensure stability when stationary.

Antistatic Function
Dust extractors and tools with antistatic function to prevent static buildup when working.
CLEANTEC Connection System
Integrated bayonet fitting as the connecting element between the extractor and the tool.
Speed control for adjusting to the working material.

Warranty Information

Warranty Claims Just Tools will honour all warranties as offered by each manufacturer (as per above details) Please fill in your warranty card or register online if required on the purchase of any product. All warranty claims can be dealt with at your closest authorised repair agent or dealer. A copy of your proof of purchase (Tax Invoice) will be required for all warranty claims. If tools are returned to Just Tools for Warranty claims, the end user is responsible for the freight charge for return of the item, however, once the warranty repair is complete, the items will be dispatched at the cost of Just Tools.