Don't fool with tools.

Power tools are relatively inexpensive and come with a huge range of accessories. But they should be used with caution, as there is always the possibility of accidents.

New homes have a life saving safety device that automatically disconnects the power in the event of a power leakage, within safety limits. The safety device is called E.C.B.R. and can be installed in an existing house, also available as a portable plug in device to protect the user of possible fault. Should a power tool become faulty have it repaired by a qualified person from the manufactures approved service agent for that brand of tool.

Never overload or overheat tools. If a fuse blows or there is excessive sparking or pungent smell, disconnect it and have it examined by a qualified person. Extension cords must have approved sockets fitted, and not excessively long also run the lead out, don't leave it coiled up, brightly coloured leads are easily noticeable and can be avoided

Never wear loose clothing when using power tools, tie back hair. Power tools generate dust, so safety goggles should be used. Dust masks prevent dust inhalation, earmuffs protect the hearing and gloves protect the hands when using heavy equipment. Disconnect tools buy pulling out the plug top before making any adjustments to blades or cutters.

FOLLOW THESE TROUBLE FREE SIMPLE HINTS.

When using an electric drill, hold the drill in line with the chuck. You won't break so many drill bits and you'll drill a cleaner hole.
When using a jigsaw, make sure the roller guide is firmly engaged on the back of the blade. This ensures a straight cut and won't bend the operating arm.
When using a circular saw, adjust the blade so it clears the bottom of the cutting surface by 5mm,this ensures a cleaner cut.
Before you add a bandsaw to your workshop remember, a three-wheel bandsaw has a thinner blade than a two-wheel bandsaw, the two wheel being more robust.
When using a bench or band saw, push the work through with a notched stick, keeping your fingers clear of the blade.
For abetter job when cutting timber, always use a sharp blade, which lowers the risk of burning the timber, overheating the machine and possible burnout.
When using a sander, use a good quality cloth backed abrasive, it lasts longer and doesn't clog as readily. Exhausting the dust from the work surface does help to get a better finish.
When using an angle grinder, place a paper washer both sides of the cutting disc, easing the removal of the disc. Always hold the machine to the side of your person.
Select a lower speed when drilling brickwork or concrete, ensuring long life and less breakage for your drills.
For cutting aluminium or steel use a carbide saw blade designed for the purpose, use a lubricant to ensure accurate cutting and long blade life.
ALWAYS USE THE RIGHT TOOL FOR THE JOB, DON'T IMPROVISE.