Features:
RT-7690-2 - is a self-leveling, remote controlled, simultaneous level and plumb
rotational laser system for interior and exterior applications.

Automatically Self-Leveling: Set it and Forget it!
Self-leveling lasers bring unmatched precision to the jobsite. Gravity-leveled dual
pendulum technology, combined with out-of-level detection, eliminates tool status checks
(even on busy jobsites where vibration, impacts and temperature changes are common)
costly errors and set up time.

Dual Pendulum Self Leveling Technology:  Place the RT-7690-2 laser tool on any
surface, and the unit's dual pendulum self leveling system levels and plumbs without ever
having to move the system.    The pendulum self leveling system utilizes gravity to
consistently self-level and combined out of level indication eliminates tool status checks
(even on busy jobsites where vibration, impacts and temperature changes are common)
costly errors and set up times.   Set it and forget it!

Automatic out of level sensing:  The RT-7690-2 laser system has both audio (beeper) and
visual (blinking laser beam) out of level indication that alerts the user if the unit has been
bumped or disturbed out of level after initial set up. 

Line Dither/Scan and Spin Modes:  The RT-7690-2 laser system has two modes, the line
dither/scan and spin modes allowing the user to customize the laser beams for their
interior and exterior level and plumb applications. The line dither/scan mode has six
adjustable line lengths allowing the user to select the laser beam length and brightness
that meets their specific interior level and plumb application requirements.  The spin
mode has three different speeds allowing the user to select the beam brightness based on
the ambient lighting conditions and specific interior or exterior level and/or plumb
application.  The included laser beam detector/receiver can be used to detect the laser
beam in lighting conditions where the laser beam is not visible. 

RF Remote Control:  The RT-7690-2 laser system has an RF remote control that allows
for non-directional, unobstructed operation of all the laser functions anywhere on the
jobsite.  The RF remote control allows for single person operation of the laser system
from the point of application. 

User Recalibration:  Unlike other laser products, users can easily calibrate the RT-7690-2
system keeping it on the jobsite and saving time and money.

Specifications:
• Accuracy: Level: +/- 1/8" @ 100';  Plumb:  +/- 1/4" @ 100'
• Self-Leveling Range: Level:  +/- 6 degrees; Plumb:  +/- 6 degrees
• Line Dither/Scan Mode: 4 line lengths (3-180 degrees)
• Variable Speed: 350-1200 rpm (3 speeds)
• Plumb Alignment Range: +/- 2 degrees
• Level & Plumb Self-Leveling Range: +/- 6 degrees
• Laser Detector for Beam Detection:  300' Range (radius)
• Dual Mode:  Adjustable Line Lengths; Variable Rotation
• Pendulum Lock: Protects pendulum during transportation and storage for added durability
• RF Remote Control Range: 300'(radius)
• Tripod Mount: 5/8" x 11
• Laser Diode: Class III, 2 635nm diodes
• Power Supply: 4 "D" batteries (not included) or A/C power adaptor

Applications:
• Carpentry: Level and set cabinets and countertops; Level and plumb decks; Plumb framing and partition walls
• Concrete: Set forms and footings
• Electrical: Level electrical outlets; Check conduit clearance; Layout conduit and wiring
• Flooring: Layout tile
• Plumbing: Layout piping, sewer lines, drainage and feed lines; Set grade
• Other: Set ridge beams; Install siding, wall tile and masonry walls; Set landscape grade; Install drop ceiling, Layout walls; Layout duct work

Includes:
• Unit
• Detector/remote control
• Rod bracket
• Target
• Glasses
• AC/DC adaptor
• Kitbox.