
NEW RELEASE
Strengths and benefits:
Brushless EC-TEC motor with integrated motor management for long service life
and the highest output
Impressive ergonomics: Compact, lightweight and perfectly balanced
Fully electron torque setting and switch-off for precise fastening
Switch over from fastening to drilling without changing the torque setting
FastFix interface for all FastFix attachments and CENTROTEC rapid tool-change
system
Latest Lithium-ion battery technology for the longest sustained usage
Technical data:
Battery voltage : 10.8 V
No-load speed, 1st gear/2nd gear : 0 - 450/0 - 1500 min-1
Drilling diameter, wood/steel : 25/14 mm
Torque adjustment : 0.5-8/0.5-6 Nm
Max. torque, wood/steel : 22/30 Nm
Chuck range : 1.5 - 13 mm
Battery Capacity : 2.6 Ah
Charging time Li Ion battery pack : 45 min
Weight with Li Ion battery pack : 1.4 kg
Includes:
spare battery pack S Li-Ion 2.6 Ah
FastFix keyless chuck 13 mm
CENTROTEC chuck
wood drill bit D4 CENTROTEC
CENTROTEC magnetic bit holder
bit PZ 2
charger TRC 3
|
3 YAERS WARRANTY
Brawn Meets Brains. The T 12 +3 | T 15+3 Cordless Drills |
|
|
|
| In a class by itself: The T+3-Series |
|
| |
12 Volt, 15 Volt, 18 Volt its time to break with conventional thinking. The T+3 Series cordless drills don't belong to a voltage class, but rather to a class that is completely redefined by the interplay of brains and brawn: a motor design that guarantees extra performance, longlasting battery packs with modern lithium-ion technology. |
|
| |
|
|
| |
| |
|
| |
|
| |
|
| |
The +3 principle |
| |
|
| |
Stay versatile and flexible |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| |
The real test is driving screws. Thats why the latest T 12+3 and T 15+3 cordless drills are outfitted with a real power plant - the patented EC-TEC motor. This motor is not only brush-less and therefore free of wear, it knows how to convert battery energy into performance - without any significant loss - due to intelligent motor management.
|
| | |
|
|
EC-TEC motors are brush-less and therefore free from wear. You'll be impressed by their efficiency and amazing power. |
 |
| |
|
|
Electronic motor management guarantees the longest service life - microprocessors monitor and control the temperature, voltage, and current consumption of the motor, electronics and battery. |
 |
| |
|
|
This mode switch really saves time - it allows for instant switch-over between drilling and fastening, without adjusting the torque setting. |
 |
| |
|
|
The light, compact form, the slender Softgrip handle and the perfectly balanced design ensure that work goes easily and comfortably. |
 |
| |
|
|
The practical, convenient magnetic bit holder provides space for up to four bits. |
 |
| |
|
|
The FastFix interface is the key to the CENTROTEC quick change system and all FastFix adapters. All other types of bits can be used with the standard chuck. |
 | |
|
|
| Stay versatile and flexible. Work right up against the edge. Change in seconds between driving screws, drilling and countersinking. Guarantee precise depths. And easily drill around courners. With the T+3 Series and its adaptable FastFix chuck system, you can do it all. | |
|
|
|
|
|
1 |
FastFix eccentric adapter |
2 |
Standard chuck |
3 |
CENTROTEC |
| |
The FastFix eccentric adapter makes working close to edges very easy. Screws can easily be placed and fastened close to the edge. |
|
A standard accessory so that every type of bit can be used, from hole saws to Forstner bits. |
|
The CENTROTEC quick change system replaces chucks and bit holders - it is 50% smaller and 80% lighter than a standard chuck and makes changing between drilling, countersinking and screwdriving significantly faster. |
|
4 |
FastFix depth stop |
5 |
FastFix angle adapter |
|
|
| |
The FastFix depth stop guarantees that screws will be at a precise and uniform depth - the optimal solution, when installing plasterboard for example. |
|
The FastFix angle adapter lets you fasten around corners. Concealed screws can be reached very easily - even if there is hardly room for your hand. |
| |