Features:
• An entirely new generation of cutter is born. Partner K750 has been redeveloped from the bottom up, inside and out.
• New, exclusive motor technology, DualCharge, provides an extremely powerful motor producing 3.7 kW with low emissions and impressive fuel economy. In short, a cleaner and more efficient motor.
• The K750 is also fitted with a large, effective muffler and a newly developed vibration dampening system that provides an extremely quiet and easy-to-use machine.
• All technical solutions are as always implemented with the user’s best interests in mind. And to allow for uncompromisingly efficient cutting.
• Suitable for Light concrete cutting, Pile cutting, Minor asphalt work, Masonry work, Gas/water/sewer maintenance, Dismantling work (auto, ship, airplane etc.), & Landscape work
• Dual Charge: Motor with DualCharge provides considerably better power, higher torque and less emissions. The secret behind the DualCharge technology is that you use twin flushing ducts, one for clean air and one for the fuel/air mixture A barrier of clean air first presses out the burnt gases whereupon the fuel/air mixture is flushed in. This results in a more powerful motor, better fuel economy and a drop in emissions by fully 70% compared to previous cutter generations. The fuel mixture that passes the main bearings and crank bearings is more concentrated and lubricates the motor more effectively as a result. A: Fuel/air mixture. B: Clean air. C: Exhaust.
• Fewer vibrations and less noise: The newly developed vibration dampening system results in considerably lower vibrations and more comfortable operation.
• Compact design and functional ergonomics: The new Partner K750 has a modern and compact design. The machine is built in modules with anti-vibration elements that keep vibration levels below 5 m/s2. To achieve a comfortable operating posture and reduce the load on the user, the distance between handles is large. The handles and the short motor housing on the K750 mean the user is always close to the machine making it easier to handle and control. To assist the user still further, the machine has been fitted with a new, more robust front handle that gives a more comfortable grip.
• New Active Air Filtration™: Active Air Filtration™, centrifugal air cleaning in three stages increases service life and extends the intervals between services. Active Air Filtration™, is based on three separate filter systems. The first system uses the centrifugal force at the cooling fan and separates 80–90% of the dust particles from the intake air. To further improve the Active Air Filtration™ system on the K750, a settling compartment has been fitted where any extra dust settles, which mean the filter stays clean even longer. The intake air then passes through a second stage in the form of an oil impregnated 3-layer adhesive filter that catches any remaining dust particles. The third stage is a traditional paper filter, which represents an extra level of security preventing dust particles from mixing with the intake air. The effectiveness of Active Air Filtration™ minimizes the risk of harmful dust particles mixing with the intake air and entering the motor, which would lead to premature wear. This
  extends the cleaning interval for the fixed filters 3–5 times (compared to conventional filter systems), which reduces idle time and service costs.
  A: The first, active filter stage utilises the centrifugal force at the flywheel and filters out 90% of the cutter dust.
  B: The next stage is a settling compartment where the dust is deposited, the air is then directed into an oil impregnated adhesive filter where any remaining dust attaches to the large sticky surface of the filter.
  C: The third stage is a safety back-up filter of folded paper.
• SmartCarb™: SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. To ensure our engines continue to deliver top performance even when their filters are starting to clog, we developed SmartCarb™, a carburettor with built-in filter compensation which keeps the fuel/air ratio constant. Alongside Active Air Filtration™, SmartCarb™ ensures maintained high power output, better filter economy, lower fuel consumption and reduced exhaust emissions.
• Clear level window on tank: New, clearly-visible fuel indicator in the tankshows the fuel level to avoid unnecessary stoppages.
• Wet cutting kit: When cutting in areas where space is limited or dust must be controlled, wet cutting is the method of choice. Even indoors, wet cutting is often the best option. Besides immobilising the dust, water helps to clear material out of the cut and to cool the blade. Wet cutting reduces wear and allows blades to last longer. To make best use of the water and to avoid unnecessary surplus or spray, it is important that the stream of water is applied correctly to the blade. All Partner power cutters (except K2300 EL) are equipped with a wet-cutting kit.
• Integrated holder for T-wrench: Practical holder for the spark plug wrench by the faucet.
• Dura Starter: DuraStarter™, dust sealed starter increases reliability and service life. the strong starter cord reduces the risk of downtime.
• Sealed transmission and Poly V belt: The Poly V drive belt ensures better transmission, less retensioning and increased service life.
• Reversible cutting arm: Reversible cutting arm gives improved accessibility. Reversing the cutting arm with just a few simple operations allows you to get the blade as close to the wall or floor as possible. For many jobs, this feature is the deciding factor.
• Automatic lubrication of the clutch bearing provides increased service life and more reliable operation. Working in extremely dusty, dry and warm environments, the bearing is heavily exposed. The automatic lubrication system reduces the risk of seizing for the bearing, and therefore means increased reliability and reduced maintenance.

Specifications:
• Engine: Air-cooled, 2-stroke engine
• Displacement: 74 cc
• Power: 3.7 kW (5 hp)
• Weight, without blade: 9.4/9,7 kg (20.7/21.4 lbs)
• Fuel tank volume: 0.90 l
• Bar length: 300/350 mm (12/14'')
• Cutting Depth: 100/125 mm (4/5'')
• Blade Diameter: 350 mm (14'')
• Cutting Depth: 100/125 mm (4/5'')